IMETEC Intelligent Equipment (Shandong) Group Co., Ltd. is one of the leading manufacturers and suppliers of vertical pull tmr mixer in China. Welcome to wholesale durable vertical pull tmr mixer made in China here and get quotation from our factory. All CE approved products are with high quality and competitive price.
Product Overview
Products Description
After loading through the top, the ingredients are lifted, turned and recirculated by the vertical auger. Cutting knives can assist with long-fiber forage such as hay, alfalfa and straw. Concentrates and other ration components are then incorporated until the batch reaches the desired consistency, after which the finished TMR can be discharged into a feed bunk or designated feeding lane.
Key Features & Advantages
- Vertical mixing design: The circulation pattern is well suited to rations containing substantial amounts of fibrous forage.
- Long-fiber handling: Cutting knives help process hay, alfalfa and straw before the ingredients are blended.
- Pull-type operation: It connects to a suitable agricultural tractor and can travel between barns and feeding areas.
- Streamlined feeding workflow: Loading, mixing and feed delivery can be organized into one continuous process, reducing handling steps.
- Batch consistency: Controlled loading quantities combined with continuous circulation help distribute the ingredients more evenly.
- Machine loading: The open-top chamber is suitable for loading with a front loader or similar equipment.
- Optional weighing system: An electronic weighing package can be specified to monitor ingredient weights and support ration management.
- Heavy-duty running structure: The steel chassis, hitch and running gear are intended for routine farm transport and mixing work.
Product Specifications
|
Item |
Specification |
|
Product Name |
Vertical Pull TMR Mixer |
|
Product Type |
Pull-Type Vertical TMR Mixer |
|
Mixing System |
Vertical Auger Circulation Mixing |
|
Power Source |
Tractor PTO |
|
Configuration |
Trailed |
|
Loading |
Top Loading |
|
Discharge |
Mechanical or hydraulic discharge, configuration dependent |
|
Running Gear |
Agricultural Implement Tires |
|
Cutting Knives |
Replaceable type, model dependent |
|
Weighing |
Optional electronic weighing |
Materials & Exterior Design
|
Component |
English Description |
|
Vertical Auger |
Performs the primary lifting, turning and blending of material and operates under high cyclic loads. |
|
Cutting Knives |
Directly engages forage; wear-resistant material and replaceable construction are preferred. |
|
Chassis |
Carries the machine and loaded dynamic loads through a steel load-bearing frame. |
|
Hitch |
The front drawbar connects to the tractor and supports movement between feeding areas. |
|
Finish |
Typical finishing includes fabrication, surface preparation, anti-corrosion priming and top coating for outdoor durability. |
|
Appearance |
The pictured machine uses a green body with a black chassis and dark drive components, giving it a conventional agricultural equipment appearance. |
Working Principle & Operating Sequence
|
Step |
Operation / English |
|
Inspect the machine |
Check the PTO drive, hitch connection, tires, hydraulic lines, knives and safety components. |
|
Connect to tractor |
Complete the hitch connection and install the PTO driveline correctly. |
|
Load forage |
Load silage, hay, alfalfa or other forage according to the ration program. |
|
Start forage processing |
Start the mixing system so the auger circulates the material while the knives assist with long-fiber processing. |
|
Add concentrates |
Add grains, concentrates, minerals or other ingredients according to the ration. |
|
Complete blending |
Maintain an appropriate mixing time and observe uniformity while avoiding unnecessary over-mixing. |
|
Discharge feed |
Open the discharge system and deliver the finished TMR into the feed bunk or along the designated feeding route. |
Applications
|
Application |
English Description |
|
Dairy Farms |
Used for TMR preparation and daily feeding across lactating cows, dry cows, replacement stock and other dairy groups. |
|
Beef Cattle Farms |
Suitable for blending forage and concentrates for feedlot and other beef cattle operations. |
|
Large Livestock Farms |
Well suited to farms where the feeding unit must travel between multiple barns or feeding areas. |
|
Agricultural Cooperatives |
Can serve as a mobile unit for centralized TMR preparation in cooperative or shared-facility operations. |
|
Mechanized Feeding Systems |
Suitable for farms equipped with loading machinery that want a more efficient link between ration preparation and feeding. |
Quality Control
|
Control Point |
English Requirement |
|
Incoming Material Inspection |
Verify the dimensions, grade and visual condition of steel, auger materials, knives and critical purchased parts. |
|
Welding Quality |
Inspect weld continuity and workmanship on the mixing chamber, hitch and load-bearing chassis. |
|
Auger Assembly |
Confirm secure auger mounting, appropriate operating clearances and properly fastened knives without interference. |
|
Drive Test |
Run the driveline without load to check for abnormal noise, vibration and temperature rise. |
|
Hydraulic Test |
Where hydraulic discharge is fitted, inspect hoses, fittings, cylinders and valves for leaks and proper movement. |
|
Final Machine Test |
Verify mixing, discharge, towing-related functions and safety components before release. |
After-Sales Service
|
Service |
English Service |
|
Technical Documentation |
Supply operation manuals, maintenance instructions, parts information and applicable hydraulic/electrical diagrams. |
|
Remote Support |
Support overseas customers with image, video and online troubleshooting for common operating issues. |
|
Spare Parts |
Common spare parts can include knives, bearings, seals, hydraulic components and PTO-related parts. |
|
Maintenance Guidance |
Provide routine guidance for lubrication, cleaning, knife inspection, auger checks and hydraulic system inspection. |
Frequently Asked Questions
Q: What is Vertical Pull TMR Mixer?
A: It is a tractor-pulled vertical TMR mixing machine for processing and blending forage, silage and concentrates for cattle feeding.
Q: Which animals is it designed for?
A: It is primarily intended for dairy and beef cattle; the ration itself should be formulated for the animal group and production stage.
Q: Can it handle hay, alfalfa and straw?
A: It can handle suitable fibrous forage; whole-bale capability and allowable forage length should be confirmed against the actual model and knife setup.
Q: Does it require a tractor?
A: A pull-type unit normally requires a tractor for towing and PTO power.
Q: How should the capacity be selected?
A: Capacity should be selected according to herd size, daily feed requirement, mixing frequency, available tractor capability and farm layout.
Q: What should be checked before operation?
A: Inspect the PTO, hitch, tires, knives, auger, hydraulic system, lubrication points and discharge mechanism before starting.
Q: How can service life be extended?
A: Clean residual feed regularly, keep bearings and driveline components lubricated, replace worn knives promptly, and stop for inspection if abnormal noise or vibration appears.
Hot Tags: vertical pull tmr mixer, China vertical pull tmr mixer manufacturers, suppliers, factory, fodder mixer, Livestock Mixer Feeders, Self propelled Mixing Wagons, Sheep feed mixers, skid steer feed mixer, small feed mixer
