Complete a full visual check of the entire unit before operation. Inspect all fasteners, transmission assemblies, cutting components and safety guards to make sure they are intact and firmly secured. Check hydraulic joints and electrical parts for any unusual conditions. Do not start the machine if any issue is identified.
Sort raw forage materials ahead of feeding. Clear hard foreign objects from the feed stock to prevent damage to internal cutting and forming structures. Maintain steady, even material feeding while the machine runs, and avoid overfilling the feeding chamber to prevent blockages.
Operators must follow standard working procedures during operation. Keep clear of rotating and moving assemblies while the machine is active. Monitor operating conditions continuously, and shut down the unit immediately if unusual noise or vibration occurs. Any troubleshooting work can only start after the machine has fully stopped.
Thoroughly clean the machine after every work session. Remove leftover forage, plant debris and dust from the cutting chamber, feed rollers, wrapping mechanism and outer surfaces. Residual organic material can lead to corrosion and mould if left uncleaned. Take care to protect electrical and hydraulic components from direct water spray during cleaning.
Lubricate all pivot points, bearings, chains and gear assemblies on a regular schedule as outlined in maintenance guidelines. Proper lubrication cuts friction and slows wear on moving parts, supporting reliable performance in dusty farm environments.
Check consumable wearing parts regularly. Examine cutting blades, drive belts, seals and wrapping components for signs of wear or deformation. Sharpen or replace these parts once their performance declines, to maintain consistent silage quality and reliable forming and wrapping results.
Carry out routine inspections of hydraulic and electrical systems. Keep hydraulic fluid clean and free of contaminants. Check wiring connections and control switches to ensure stable signal transmission. Keep all seal covers and protective housings closed to keep out dust and moisture.
For long-term idle periods, store the machine in a dry, well-ventilated covered area. Finish full cleaning and anti-corrosion treatment before storage. Support delicate components properly and cover the whole machine to shield it from rain, direct sunlight and harsh weather.
Only trained staff can carry out maintenance and adjustment tasks. Unauthorized disassembly or modification of core structures is not allowed. Reach out to professional service support when complex faults cannot be fixed on site.
Keep the surrounding work area tidy during daily use. Maintain clear pathways for feeding material and removing finished bales. Proper site housekeeping helps reduce operational hazards and improves overall work efficiency.
https://www.imeteciot.com/silage-machine/automatic-silage-making-machine.html


